Blessed Fall Leaf Snap Tab In the Hoop Design Single for 4x4 hoops
This is a SINGLE design - it fits in a 4x4 hoop.
Design itself measures 1.5" x 3.46" and has 1943 stitches. There are 5 color stops, so it is a very QUICK stitch out!
It's simple to make! Follow these simple steps for the snap tab!
Hoop medium tear away stabilizer.
Run Placement Stitches on stabilizer only.
Float material for the front of your tag.
Run the middles of the design, including the sketchy orbits and moon and star points in colors that contrast nicely with your material.
Float material for the back of your tag on the back of your hoop with either tape or a embroidery adhesive.
Stitch the final outline, which encloses all the stitching inside the tag leaving a perfect finish. Use the same color as you did for the lettering, the same color as the material, or something completely different for a fun look!
Remove from hoop and trim around the outline - leave about 1/8" or 1/16" when you trim. Go slowly and use nice long cuts for the best look.
Apply snaps on the tab. My favorites are plastic KAM snaps. You may also use rivets to permanently attach your tag to the hardware you choose. You can use a key ring or a d ring or a d ring swivel lobster clasp.